Intercoolers + piping?

[bobpogoman]

i thought about these

http://www.suprasport.com/Spearco-R...ooler-Kit-for-Toyota-Supra-MK3_p_48-1586.html

http://www.suprasport.com/LIPP-Aluminum-Intercooler-Piping_p_48-344.html

will it fit great?? i know spearco replica intercooler is in and out 2.5 inches, the kit that make it fit the stock ic piping is 2.5 inches too? or it do a 2.5:2.0 inches conversion?

so i need that ic kit and the lipp ic piping 2.5 inches, and for my turbo inlet im not sure, i got a ct-26 60-1 trim, what is the inlet??

 

[Jack]

How about this......

I will have a mk3 in the shop next week and I will see if the X02 IC will fit the LIPP Ic kit. It will be incorporated into the LIPP kit when everything works out OK

 

[Jack]

I have a bunch of the X02 Spearco's in stock...They are absolutely identical to the original!!!!

 

[Rennat]

http://www.suprasport.com/20-x-9-x-25-Delta-Fin-Design-Front-Facing-Intercooler_p_434-1568.html

what about that one? does it come in 3'' or 2.5''? you guys say both. haha

 

[Jack]

http://www.suprasport.com/20-x-9-x-25-Delta-Fin-Design-Front-Facing-Intercooler_p_434-1568.html

what about that one? does it come in 3'' or 2.5''? you guys say both. haha

Well I guess thats what I get when I take info straight from the manufacturers website...

It is a 2.5" inlet and outlet

 

[starscream5000]

The kits from the first post should work, I would install the piping first, then mount the IC up where it needs to be according to where the IC pipes are pointing.

 

[teedoff00]

so i need that ic kit and the lipp ic piping 2.5 inches, and for my turbo inlet im not sure, i got a ct-26 60-1 trim, what is the inlet??

IIRC the outlet of the ct-26 is about 2 1/4 inch.

 

[bobpogoman]

kk jack check it out, if spearco ic fit with lipp ic piping, let me know by pm, i wont always check this post