injector resistor box

[domdomleblanc]

hello guys
I'm new on this forum... and with all 7mge stuff

I am actually swapping a 7mge from a cressida (don't know the year) into a 94 4runner

here's the truck


All the wiring part is done but when I crank the engine it start for 2 or 3 second and it stall .... like spraying gaz in the intake

after few night of searching on the net I realized one thing ... I don't have an injector resistor box ....and worse I dont have the plug in my harness

how many wires should be pluged in this box??
do I really need it or some model have separate resistense on each injector??
here's what it look like



thanks alot
DOm

 

[dumbo]

you dont have the plug in the harness? is it all 7m eletronics from the cressida? if it runs for few seconds then quits I dont think it would be the injector resitor pack but that me, badass 4runner man I like:love::love:
im assuming you can still check codes then right??

EDIT: Is that a solid front end conversion? maybe I should go to bed...

 

[domdomleblanc]

well...... a dont have the plug but I have 2 free wire .....1 yellow and the other one yellow with black stripe near the distrubutor

somebody know where I can buy or download the service manual for a cressida

I only have half of the electric part .....
thanks
DOm

 

[dumbo]

by half of the electric what do you mean?

do you have the 7m harness including the diagnostic terminal?(sorry don't know the proper name)