Injector clip questions...

[Justin727]

Well I am very weary of hacking up my Brand new wiring harness to install my injectors clips...

I was wondering if anyone has made a jumper harness or another clip to connect the 2 together with out cutting the existing wiring harness.

all help will be very appreciated!
Thanks
Justin

 

[HommerSimpson]

Well I am very weary of hacking up my Brand new wiring harness to install my injectors clips...

I was wondering if anyone has made a jumper harness or another clip to connect the 2 together with out cutting the existing wiring harness.

all help will be very appreciated!
Thanks
Justin

are the insides of plugs the same ? the metal male part.. can swap plugs then...

 

[Facime]

someone here has, I just saw it in a build thread the other day...cant for the life of me remember who though. They had a new harness as well and a custom intake. All you would need is a the female side of the injector plug...:dunno:

 

[IJ.]

If you do it correctly it's NOT hacking up the harness
ie: boots heatshrink and the correct crimping tool when you termintate the wires.

 

[Justin727]

I know Ian but I must say I want my new harness to not be tampered with. I'd rather just plug in a jumper harness between the Precision injectors and wiring harness.

 

[shaeff]

Yep, it was done here:
http://rob.carlile.home.mchsi.com/lexus/lexus1.htm

 

[Facime]

Yep, it was done here:
http://rob.carlile.home.mchsi.com/lexus/lexus1.htm

^^ holy crap thats the exact thing I was referring too. I followed that link from another thread just the other day. Thanks Shaeff, I knew I wasnt loco.

 

[shaeff]

Welcome. I post that link so very many times. LOL. I bet nearly half the posts I've made has that link in it!

 

[Poodles]

http://www.supramania.com/forums/showthread.php?t=37388

has the website of where to buy them already made too..

 

[noah89t]

^^^^good idea in that thread

 

[Sil]

Thats pretty neat, but for $107 I'll stick with my snip, solder and heat shrink.

 

[Justin727]

i will Consider it, but I'm going to look for the male side connectors first. It isn't too difficult to make them... Just gotta find the connectors.

Thanks Shaeff and poodles

 

[Poodles]

Thats pretty neat, but for $107 I'll stick with my snip, solder and heat shrink.

When you have a BRAND NEW $600+ engine harness from the dealer, I'm not hacking ANYTHING on it.

 

[Justin727]

so I suppose I would need this pluger here! i will order 6 of thems!

 

[shaeff]

When you have a BRAND NEW $600+ engine harness from the dealer, I'm not hacking ANYTHING on it.

I would. I would likely splice, solder, heat shrink, then put a coat or two of brush on tape on the edges of the heat shrink.

After that, put some small wire loom over it, and you're done. Providing you do a good job, you've got nothing to worry about!

 

[Poodles]

Yes, but if I ever part the car, I want to be able to sell an unhacked harness...

 

[bryanintexas]

so I suppose I would need this pluger here! i will order 6 of thems!
[thumb]http://www.fiveomotorsport.com/PartsJPEGs/Injectors/Connect_DensoM.jpg[/thumb]

Justin,

I bought a set of these to do my RC's. I felt the same way about my new harness. Worked out good. Great service from as well!

 

[shaeff]

I'll likely never sell my car, as I'll NEVER get what I've put into it. Besides, if done properly, I can imagine that a lot of people who don't like electrical work would jump all over it so they didn't have to do the work themselves. Of course, that's only if you parted the car.

 

[Sil]

If someone wants the stock injector clips to make something out of them, let me know by shooting me a pm.

I don't consider myself electronically inclined, but I still did my injector clips, its just basic soldering. People just gotta take their time and do it right. But like Shaeff said, some people just feel more comfortable doing it this way.

 

[Justin727]

well it's not that I can't make any wiring connections but I'd feel much better not molesting a brand new wiring harness at all. It's just as easy as making a jumper harness then it is to hack into the existing harness. Therefore if I would like to put the car back to stock specs I can and move the injectors and jumper harness to a new car!!!

Thanks bryan Ill order a set first thing monday I didnt get to it the other day!