info for adjusting cam gear AEM

tubbie

Yes, powerful Jedi....
Apr 4, 2005
821
0
16
Hoschton, GA
jimi87-t said:
I think he is asking where to buy and how to adjust them? :dunno:


Loosen the three allen bolts, put on a 14mm socket to the cam, and adjust away. Once done, tighten the 3 allen bolts tight and your done.... :biglaugh:
 

IJ.

Grumpy Old Man
Mar 30, 2005
38,728
0
0
62
I come from a land down under
It varies motor to motor depending on if the block or head have been machined, valve clearance and so on.

The only way to know for sure is to adjust then run it on the dyno then adjust again and so on.
 

jimi87-t

Active Member
Oct 12, 2005
1,126
4
38
Colorado Springs
tubbie said:
Loosen the three allen bolts, put on a 14mm socket to the cam, and adjust away. Once done, tighten the 3 allen bolts tight and your done.... :biglaugh:

Yeah I know, I think you missed what I said, I was trying to figure out what he was asking. And Ians right, it's a whole other matter of knowing how much to adjust.