hello I have to buy cam gear AEM for my supra 7mgte can you say to me which and the adjusting :1zhelp: thank you very much
info for adjusting cam gear AEM
- Thread starter supra concept
- Start date
not sure I understand your question, but yes AEM makes them for the 7M, and yes they are adjustable. You can usually find them on ebay I've seen.
http://cgi.ebay.com/ebaymotors/AEM-CAM-GEARS-SET-TOYOTA-SUPRA-86-92-7MGTE-DOHC_W0QQcmdZViewItemQQcategoryZ33567QQitemZ8039225754QQrdZ1
http://cgi.ebay.com/ebaymotors/AEM-CAM-GEARS-SET-TOYOTA-SUPRA-86-92-7MGTE-DOHC_W0QQcmdZViewItemQQcategoryZ33567QQitemZ8039225754QQrdZ1
jimi87-t said:
Loosen the three allen bolts, put on a 14mm socket to the cam, and adjust away. Once done, tighten the 3 allen bolts tight and your done.... :biglaugh:
Knowing how much to adjust and in what direction is a whole other matter!
That and having the equipment to measure it as the 7M is a bitch to dial indicate!
That and having the equipment to measure it as the 7M is a bitch to dial indicate!
sorry , I wanted to know the angle of cam which had to be put to have a maximum of HP .thank you very much
It varies motor to motor depending on if the block or head have been machined, valve clearance and so on.
The only way to know for sure is to adjust then run it on the dyno then adjust again and so on.
The only way to know for sure is to adjust then run it on the dyno then adjust again and so on.
tubbie said:
Yeah I know, I think you missed what I said, I was trying to figure out what he was asking. And Ians right, it's a whole other matter of knowing how much to adjust.