IC piping

tbcmorris

tbcmorris

SM Expert Thread Derailer
Mar 14, 2007
1,820
0
0
39
PRUVEN PERFORMANCE MILFORD CT
The piping he did was way overboard that's why it was interesting. Poodles I don't think a larger causes lag when your running an amount of boost that requires a larger diameter...I am in the middle of redoing all my piping and I'm goin with 3 in instead of 2.5 this time.
 
Stretch

Stretch

Tallest MK3 driver ever!!
Mar 30, 2005
1,275
0
36
37
Toronto, Ontario
First thing I thought of when I saw it again. This 1G is in a Cressidia in case anyone cares :icon_razz. His piping routing is strikingly similar.
eric

sm_photo_missing.jpg
 
Canuckrz

Canuckrz

New Member
Jan 13, 2009
852
0
0
Calgary, Alberta
whowouldfigga;1252454 said:
On the topic of Hot and IC piping what opinions do we have on using PVC piping.

John B Lunsford has a site and directions on how to put together a PVC system. After reading the information it leads me to believe that PVC works better than metal pipes because it keeps the temps lowers or insulates the IC plumbing form the engine bay heat. Am I reading to much into the mod?
Click to expand...

omg I've been looking for that damn guide everywhere, all the links I could find were broken uptil now. ::w00t::
 
H

HommerSimpson

New Member
Dec 31, 2007
1,067
0
0
New Smyrna Beach Florida
AWWW i see yall missed me :}

Acually the car was stock when i got.. Ran good but blew head gasket soon as i turned up boost on the ct26.. It run's Just as good on bottom end as it did and runs hell lot stronger on top end now.. but boost is still at 7 psi due to i need a tranny..and dont want to blow it compleatly.
IN my vids NONE are all OUT trying to run piss out of her.. and i still dont understand why people think it runs hotter.. Id post ic temps.. but not worth my time but they are lowere then most in here.. Anyone notice.. theres a HUGE ass hole in front of hood ? and HUGE ass hole in back ?

Now the plan has been from day one,to hack the tubes on intercooler and move them to top. why i got a 4" intercooler. when i get to it ill do it. till then IT WORKS

As far as the dash goes.. Ill post pic when its done and not untill... Way to much bashing in here..

Lota good info here
but yall enjoy bashing all ya want. :}

O and if you want to see more pics of car.. Just IM me at Hommersimpson@aol.com Like the other members do that like to keep intouch
 
SupraMario

SupraMario

I think it was the google
Mar 30, 2005
3,467
6
38
38
The Farm
Some people just like to conform to being the same hommer. I've always found your stuff interesting.
 
Canuckrz

Canuckrz

New Member
Jan 13, 2009
852
0
0
Calgary, Alberta
Hommer, why did you choose to go with such a large IC pipe diameter compared to the outlet on the turbo? if you had used a bit smaller piping you would likely have enough space to soften those 2 90 degree bends from the compressor and to the intake manifold a fair amount.
 
Steely

Steely

New Member
Oct 22, 2008
123
0
0
Rhode Island
as far as homers car goes... the only thing i don't like is the side pipes and the dash...
this is by far the cleanest dash i've seen...(not on a supra though but on a 7m none the less)
6746630166_large.jpg
 
Last edited:
I

IJ.

Grumpy Old Man
Mar 30, 2005
38,728
0
0
62
I come from a land down under
Steely;1253241 said:
as far as homers car goes... the only thing i don't like is the side pipes and the dash...
this is by far the cleanest dash i've seen...(not on a supra though but on a 7m none the less)
6746630166_large.jpg
Click to expand...

Not keen on a mix of digital and analog.
sdl04.jpg
 
You must log in or register to reply here.
Top Bottom