I need a 1-2 feet of 21mm aluminum rod

[Ric]

Where can i find a couple feet of 21mm round aluminum rod?

 

[IJ.]

21mm isn't a stock size that I've ever seen

 

[Enraged]

what are your tolerances like? theres 20.64mm aka 0.8175" round stock: http://www.onlinemetals.com/merchant.cfm?pid=1088&step=4&showunits=mm

 

[Ric]

Ah perfect

 

[tissimo]

sweet hood prop?

 

[suprageezer]

http://www.mcmaster.com/

http://www.use-enco.com/CGI/INSRHM

http://www1.mscdirect.com/cgi/nnsrhm

 

[souprat]

mcmaster.com is the shit. if they dont sell it you dont need it.

 

[supra90turbo]

/\ :werd:
truer words have rarely been spoken

 

[Clip]

between mcmaster and grainger, a man could do anything.

 

[Enraged]

if you want really cool stuff, check https://sdp-si.com/eStore/

 

[MDCmotorsports]

www.aedmotorsports.com

 

[Ric]

I'm building up my tranny in my garage, taking my time. I'm making shims.

Now I gotta order the raybestos blue plate clutches. They are $120 direct, or $400 from PHR What a ripoff!

I'm tired of running 12psi. I'm building up my spare a340, i never built a tranny before but it cant be too hard. I'm building something thats going to hold around 600whp, for about $200 in parts.

 

[tissimo]

I'm building up my tranny in my garage, taking my time. I'm making shims.

Now I gotta order the raybestos blue plate clutches. They are $120 direct, or $400 from PHR What a ripoff!

I'm tired of running 12psi. I'm building up my spare a340, i never built a tranny before but it cant be too hard. I'm building something thats going to hold around 600whp, for about $200 in parts.

ahh.. just doing the basic mods to the accumulators or are you going to mod the valve body as well? if so what you going to do? I have a aristo trans in my garage I'm going to use later for a drag car and while its out I'll mod it..