humm i wonder 93+ rear brake's

[NashMan]

well since i had brake on my mind i had thought and think i have herd befor but i don't know if it's ture

well i vagly remmber some talking about this

take mk4 na rear caplers and swaping them on the mk3
cause the rear piston was bigger then the reg mk3



this is what i have bean thinking of but i don't know if it's worth the time



think ls400, ls300 has teh same rear brake as the na mk4 supra

i think there the same and we have one at the local yard mabey i can compair the the 2 i migth find an answer

 

[hvyman]

not worth it unless it fits and there cheap. bigger rotors and pads would help more

 

[NashMan]

oh it will fit cause mk4 rear's are swapable on mk4 supra's

and mk4 can be easly swaped on mk3's

both are priced the same as in na rear to mk3 rears

 

[shaeff]

MKIV TT or don't even bother, IMO.

 

[adampecush]

TT brakes are not quite a direct swap either...

 

[shaeff]

^Yeah, I know that. I have one of Jake's kits to put them on.

 

[adampecush]

^Yeah, I know that. I have one of Jake's kits to put them on.

he was sold out when I was putting mine on....so i had to make my own.

 

[NashMan]

you don't really need any thing speail to install tehm not kit is needed dr jonez did this long ago

so i guess know one knows if the piston is bigger eh

 

[IJ.]

AP 4 pots on Mk4TT rotors

 

[Doward]

The size of our rears don't bother me - it's the lack of ventilation that does.

Ian, are the MKIV TT rears ventilated?

 

[tsuper92]

^^^yes

 

[adampecush]

you don't really need any thing speail to install tehm not kit is needed dr jonez did this long ago

To "install" them, sure, but I would rather not be removing material from a cast component to get the brakes to work...a centred rotor is nice to have as well.

If i recall correctly, the mk3 rears are ventilated, are they not?

 

[fool'ssupra]

You're correct.

 

[Doward]

I'm 99% certain my rear discs are solid, not vented.

 

[adampecush]

I'm 99% certain my rear discs are solid, not vented.

I'd go have another look if I were you...they're vented unless you got a horrible set of replacements.

 

[IJ.]

The size of our rears don't bother me - it's the lack of ventilation that does.

Ian, are the MKIV TT rears ventilated?

324mm diameter from memory John, rgr on vents (they all are Mk3's included)

Can't remember thickness off the top of my head either 16mm or 18mm I think.

I'm using DBA4000's front and rear.

 

[adampecush]

mk4 rears are 16mm thick, mk3 rears are 18mm.

 

[IJ.]

Thanks Adam!
(couldn't remember which way around it was)

 

[NashMan]

well look like going to have to go to the parts and do some sizeing up

 

[tsuper92]

...a centred rotor is nice to have as well.

you can press a mkIV hub into the mkIII carrier's,then it will be hub centric.the rotor will also be centered in the middle of the pads