I'm trying to remove the drivers seat from my 91 shell the car has no motor/tranny or harness I tried to connect a battery to the blue plug under the seat towards the front and nothing happened I have three of the 4 bolts out but the one in the corner by the console is stripped and I cant get a socket in place Have any of you guys moved the seat with direct power Where do I connect it Any advise would be greatly appreciated Thank You
How to move driver seat forward manually Please Help
- Thread starter Nate
- Start date
if you have 3 out of 4 bolts removed just lift the seat up enuff to get your hand under the seat.there is two threaded bars running parellel to the center console,you have to grab one of the bars and twist it ,the seat will move and you should be able to get to the bolt you need to loosen but remember that drivers seat weighs like 250lb lol.
Connect 12 volts to the 30 amp CB on Relay Block #5 in the left kick panel (remove the CB and connect to receptacle 2. If 2 doesn't work try 1).
http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=22
Connect ground to battery negative or anywhere on the body/chassis...
http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=22
Connect ground to battery negative or anywhere on the body/chassis...
Davismj711
PA Mountain Supra
I have not. For a chance at that here would have to be one in civilian hands and as far as I know none are.
Not much genius involved with reading schematics Nate but thanks for the thought. Glad to have been of help...