how much torque needed to be applied, anyone?

[89boosted]

anyone know how much torque the bolts holding the drifeshaft onto the differential need to be set at? also the ones holding the axles to the differential, thanks
Matt

 

[Rennat]

i wasnt able to get a torque wrench in there, but i tightened them as much as i could. which was easily over 40ft lbs.

 

[CyFi6]

54 ft/lbs for drive shaft to differential
51 ft lbs for axle to differential

For the future, use this, it has all you need.
http://www.cygnusx1.net/Supra/Library/TSRM/MK3/

 

[89boosted]

alright thanks for the info

i wasnt able to get a torque wrench in there, but i tightened them as much as i could. which was easily over 40ft lbs.

 

[89boosted]

alright cool thanks alot
Matt

54 ft/lbs for drive shaft to differential
51 ft lbs for axle to differential

For the future, use this, it has all you need.
http://www.cygnusx1.net/Supra/Library/TSRM/MK3/