How do you tune the Brian crower cams for the Mk3?

[BLACKCAT]

Extend the slot in the dizzy to within a mm of the end.

This picture is with the cams set at 0 & 0 with 15 degrees BTDC timing on a Aussie Cressida with the 264 cams.

I have one of the early set of cams so dont know if the distrubutor drive gear being out of sync has been resolved in the later cams.

 

[suprahero]

Kristian: One thing to keep in mind and be aware of is the less overlap you have the higher your dynamic compression will be at the same boost level right up to the point where detonation/mechanical damage occurs.

Now you tell me...............:biglaugh:

 

[IJ.]

You never asked