how do you do this????

[supra8903]

how do you do this..... make it so shinny, is it chromed, or is it polished and then cleared.

any input will help

 

[HIDPLANET]

Looks to be polished which means there is no clearcoat and has to be manually polished. Takes a lot of elbow grease and time.

 

[suprahero]

Takes a lot of elbow grease and time.

and then more elbow grease and more time, and more elbow grease and more ti...............................:biglaugh:

 

[88supraFAST1]

it takes for ever i have been working on my intake manifold for about 3 month off and on.
the prosses is a long hall

 

[suprahero]

For future reference it's process...........lol

It definately takes a long time to polish them unless maybe you have a giant electric wheel with a polishing pad on it...............good luck

 

[HIDPLANET]

Not to mention it only stays nice and shiny for a short duration.

 

[trydrew]

I began polishing up my upper intake and it does take some time. I using scotch brite pads attached to a drill as of now to get the raw look off. I still need to polish the whole thing though.

 

[Disced]

Zooloo has a write-up concerning polishing.

Step by step... Takes many, many hours.

 

[dbsupra90]

zoopseal will help protect polished bits. and it doesnt yellow like clearcoat. you will have to repolish ever so often even w/ zoopseal but about 1/6 as much as you would if you didnt use it.

 

[Clip]

yeah, start off rough with some sandpaper and gradually work to the higher grits. i think on the writeup it ended at 1600 or 2000 grit.