How did you route Boost Controller Vac. Lines?

[10secdream]

Well guys I hooked up my boost controller a couple weeks ago and I guess I got the vacuum lines too close to the exhaust piping. Needless to say thank goodness for boost cut:aigo:

How did you guys mount your lines so they are out of the way of everything? Got pictures?

 

[supradaddy0803]

Zipties and looms to route them away from all hot spots. Then since I routed my harness under the speedo cable I took all of the wires through the ECU harness hole and back to the mount where I got the controller. Under my hood unless you know what you are looking for you wouldn't see the valve or the vac lines for the boost controller. That's how I fooled this guy in a stock 08 Mustang GT he though my 1JZ was completely stock, well needless to say I laid the smack down at only 13.5 Psi. His money lost.

 

[annoyingrob]

intake piping isn't hot.

You mean exhaust piping?

 

[Kosh]

Yeah the way he had his lines running one of them ended up resting on the stock y-pipe and it got just a lil hot.

 

[annoyingrob]

In that case, when I still had my twins, I zip tied the lines to the coolant hard pipe. Worked great.

 

[10secdream]

I will give that a shot this weekend!