Home-made 550cc Injector harness?
- Thread starter Reiketsukan
- Start date
isnms;1496174 said:
Thanks for all the help, guys! ~$11 a piece definitely isn't as bad as $20!
Are you certain this will fit RC 550's?
yep, saw those too. i searched and search for it. i kept thinking for some reason it was a mustang site or something. finally came across it, and apparently five o has nothing to do with mustangs lol. i guess it's just what comes to mind.
the only reason i had pointed out the connector pigtails was because reiketsukan had asked about just trying to get that side. i agree the complete assy is the quickest and easiest way to go.
while i'm thinking about it, you can buy a depin tool for the square plug. that way you can disassemble and use some of the braided sheaths like jensen did if you so wished.
the only reason i had pointed out the connector pigtails was because reiketsukan had asked about just trying to get that side. i agree the complete assy is the quickest and easiest way to go.
while i'm thinking about it, you can buy a depin tool for the square plug. that way you can disassemble and use some of the braided sheaths like jensen did if you so wished.
This place is also good for connectors.
http://easternbeaver.com/Main/Elec__Products/Connectors/Sealed/sealed.html
http://easternbeaver.com/Main/Elec__Products/Connectors/Sealed/sealed.html
3p141592654;1496544 said:
It certainly is.
Just for reference, the engine harness uses MT series connectors in the majority of the engine bay. The part numbers for our connectors can be found on the sumitomo.jp webpage.