holset hx35 t4 housing ??

[supramic]

i have a friend of mine that is willing to sell me his hx35 for cheap. the issue is that the turbo is a t3 flange and my manifold is a t4. i don't want to use and adapter i would prefer to change the exhaust housing for a t4 flanged housing
where can i get a housing for my turbo???
:1zhelp:

 

[IndigoMKII]

Personally have never seen a t4 turbine housing on a hx35. Others might have, but in my searching I have not.

 

[supramic]

yeah thats what it seems like
for what my other friend was saying, is that bulseye and borg Warner turbos are the same as that holsets but just slightly tweaked. now if that means that there the same turbos or just very similar design i dont know.

essentially in looking to buy a turbo down pipe and waste gate for for as cheap as possible with out sacrificing quality and reliability to much. im doing a 2jz mk3 swap and i want to go single for the jump for cheap. in the future i plan on getting a different turbo to replace what ever cheap one i get thats why im really looking into holset turbos

 

[IndigoMKII]

Find an HX40. They use a t4 footprint.

 

[Moy]

I have a HX40 with the T4 footprint.... it's a MASSIVE hotside. 17cm^2 (~1.29A/R). Unless you've got headwork, higher compression, nitrous, a QSV, or something else to help spool.... it's gonna take a while to get there.

 

[1986.5supra_kid]

there are some different exhaust housings availvable but for the price you would be better with a adapter.

 

[MDCmotorsports]

Adapter it and enjoy.

 

[1986.5supra_kid]

there is a nice CNC made adapter on ebay. it has counter bored holes for the bolts too (hex head 10.9 grade come with it) and its half inch thick which isnt going to warp