ive never installed an hks turbo timer before. so yea.. i got the hks type-1 and i also got the hks harness tt-1. since my turbo timer was used, it didnt come with any instructions. can anyone help me out with this install? all input is greatly appreciated. thanks!
hks turbo timer type-1 install
- Thread starter jeddyminit
- Start date
nvm i got it figured out. just need to do some other wiring for the rpm signal.
i got the hks harness but technically it wasn't really plug and play.. i did need to ground it and tap into the parking brake switch.
fonz87;1701667 said:
i got the hks harness but technically it wasn't really plug and play.. i did need to ground it and tap into the parking brake switch.
try to ground the parking brake wire and see if it stays on and counts down.. might be a parking brake issue.. Mine did the same thing
did you set the time on the unit? for my greddy turbo timer i had to go into the settings and set a time limit before it would keep the car running. i dont have the wire ran into the rpm signal, just going to the e brake so it only works when my ebrake is set and car is off