HKS DLI wire

[josh930]

I went of this thread to hook it up but when I went to hook up the red wire I realized I had no noise filter. What would I hook up the red wire to?

http://www.supraforums.com/forum/showthread.php?t=274118

Thanks for your help

 

[MK-111]

switched live that is hot in crank and run

 

[josh930]

switched live that is hot in crank and run

I'm not sure what you mean. Can anyone explain......

 

[MK-111]

I'm not sure what you mean. Can anyone explain......

+12v live feed that is controlled by the ignition switch, and is live both when
starting and running, eg +12v to the coils and injectors is hot in crank and run

 

[josh930]

OK, so I can connect it to #2: ign pwr on the diagram correct

http://www.supramania.com/forums/showthread.php?t=75693&highlight=ignitor

 

[MK-111]

OK, so I can connect it to #2: ign pwr on the diagram correct

http://www.supramania.com/forums/showthread.php?t=75693&highlight=ignitor

yes you could. I have just found the 2jzgte diagram and the noise filter gets +12v from the same source

 

[josh930]

I'm trying to find my noise filter plug. If not I'll use the igt power wire. Thanks for your help