HI im new here and im going 1jz

white1jz90

New Member
Mar 5, 2007
20
0
0
37
Columbia,Md
Hey everybody i hope its ok if i introduce myself on here since its where ill be looking for answers to all my ?'s.My name is Floyd and im from maryland.I own a 1990 toyota supra turbo w/white package and a bhg.I currently am putting together a 1jz in my buddies garage.Using driftmotion ct26 manifold kit with a jdm ct26. Hope this isnt a bad thing to do here.
 

JASONA70

nomnomnom
Oct 27, 2006
743
0
0
socal
im doing the same setup! but thats because im a broke ass student making 9 bucks an hour tutoring little kids. a 57trim ct26 is good for 400whp with the right tuning and parts! welcome to the community !
 

tlo86

Ninja Editor 'Since 05'
Jul 24, 2005
3,914
0
0
38
Colorado
we have a seperate section for intros hehe. welcome. lots of bolt on upgrade turbos for the CT26.

im probably going 2jzgte again someday, in a gs300 this time!
 

white1jz90

New Member
Mar 5, 2007
20
0
0
37
Columbia,Md
i was prollyy ganna get my grandmom to insure the car so i wouldnt need to do emissions. Ive seen ct2657 quoted for 435hp on a 7m i thought it would prolly put out more on a 1jz. ill be using a ddp,testpipe and hopefully a rsr exhaust
 

white1jz90

New Member
Mar 5, 2007
20
0
0
37
Columbia,Md
i have a ? while im on here im ganna have a resistor pack wired into my harness by 935 and use 2jz injectors is there anything else i need to run the injectors and will i need a safc to tune them and how do i get rid of the fuel cut?i saw it at mdc and they weere using a garrent wheel and quoted it at 435.
 

JASONA70

nomnomnom
Oct 27, 2006
743
0
0
socal
white1jz90;929959 said:
i have a ? while im on here im ganna have a resistor pack wired into my harness by 935 and use 2jz injectors is there anything else i need to run the injectors and will i need a safc to tune them and how do i get rid of the fuel cut?i saw it at mdc and they weere using a garrent wheel and quoted it at 435.

to get rid of fuel cut you will need a stanalone or just get a bcc ( boost cut controller) the .57 trim ct26 is good for 400+ only with the right tuning, 400 is actually pushing it. its a really tiny turbo, if you want more power you should go with a bigger turbo, again the ct2657 is good for poor students such as myself, its a bang for your buck. i just wanted to mention that your going to have to get cam shafts; im guessing 264 or 272 depending what kind of upgrade your going to be doing in the future. I would say with all the mods 550's, afc, ddp, bcc, ebc/mbc, wideband, higher flow fuel pump, afpr and fine tune the fuel system i would be guessing 400+ with that little turbo, but if its street tuned no way you will be seeing that 400.

edit: you can wire up your own resistor pack, its here somewhere (search) btw are you talking about 435bhp or 435whp?