Help on SAFC II settings!!!

[1jzaddict]

I have been having problems on the dyno and i think that its b/c i might have some of the SAFC settings wrong. I think i have the Sensor no. wrong. i have it set on 03 in and 01 out. I have mk4 550 injectors and a walbro pump. I need to know what some other people have theirs set at that are running big power.somebody please help.

Thanks,Matt

 

[suprastanger507mgte]

sensor should both be set to 1 ( one ) for in and out.
Which wires did you hook up for the map sensor?
YOu should also make sure the sensor typ is set to Pressure.

 

[1jzaddict]

sensor should both be set to 1 ( one ) for in and out.
Which wires did you hook up for the map sensor?
YOu should also make sure the sensor typ is set to Pressure.

I think it would be different for a 1jz. I have already had it at 1 in and out, and it ran way way to rich. sensor type is set to pressure.

 

[BorHor]

Moe has a 1j.

 

[itr206]

You set it to exactly like the manual says for a JZA70. The injectors dont matter.

 

[1jzaddict]

You set it to exactly like the manual says for a JZA70. The injectors dont matter.

Is that for the 1j or the 7m.
sorry.

 

[suprastanger507mgte]

I think it would be different for a 1jz. I have already had it at 1 in and out, and it ran way way to rich. sensor type is set to pressure.

1Jz runs rich from the factory anyways. Did you add any bigger injectors?
My setup is as I described, then took it to the dyno to tune it out. Works perfectly.

I just hooked up one for Hellslegion and it works fine.

 

[itr206]

why would it be for a 7M? I have a 1JZ

Read the directions and that will help. Seriously, you just set it up just like it says.

 

[ranger2339]

Were do you get a SFACII for the 1J?


Ax

 

[bobiseverywhere]

JZA70 is the body chassis code for the MKIII with a 1JZ in it

MA70 and MA71 are the 7M Cars

 

[ranger2339]

JZA70 is the body chassis code for the MKIII with a 1JZ in it

MA70 and MA71 are the 7M Cars

Ya i know that part bro.
I was just wondering were to get one for the 1J/jza70?


Thanks
Josh

 

[itr206]

Ya i know that part bro.
I was just wondering were to get one for the 1J/jza70?


Thanks
Josh

Dude, the SAFC is universal. Anyone fits any car.

 

[Big Wang Bandit]

Were do you get a SFACII for the 1J?


Ax

Just buy a SAFC and wire it up to the instructions in the manual.

 

[suprastanger507mgte]

Were do you get a SFACII for the 1J?


Ax

IN the SAFC-II, use the t-10 pinouts from the Toyota list to make your connections. Just remember, 1jz uses the Map or Pressure sensor not the flapper type sensor. In the diagrams, I think they use the terms kinda interchangeably. Just make sure to use the correct sensor wire...