Help!!! Getting no power to the Ignitor module.

[FlawLessHOVA]

I've decided to get off my butt and Check out why im not getting spark. All of the fuses are fine. I checked and Im getting power to the coil packs. They do show a high resistance while cold though (1.5 ohms)..... I've already replaced my CPS (did from assumption when it first happened). I unplugged connector 6-p and checked for voltage and nothing. Has any one else run into this? Should I start doing voltage drops?

 

[chrisisg77]

No spark on all coils?
Does your tach move when trying to crank?
Have u checked continuity?

 

[kotu100]

Is your ecu getting power?
Where in MA are you? I may able to help out.

 

[hvyman]

Grounds on Intake manifold?

 

[CajunKenny]

How have you confirmed that you're not getting spark?

 

[FlawLessHOVA]

No spark on all coils?
Does your tach move when trying to crank?
Have u checked continuity?

I checked a plug off each coil pack.
Will check
Continuity exactly where?

 

[FlawLessHOVA]

Grounds on Intake manifold?

Will check and clean up all grounds.

Thanks

 

[FlawLessHOVA]

Is your ecu getting power?
Where in MA are you? I may able to help out.

Stupid me will check..smh
I live right next to you in Brockton.