Help 2jz stock injectors in 1jz

[Veryfastsupra1]

i need help on how to install the 2jz 550's in my 1jz i just bought them and somebody was goin to help but then back out i have the stock 7m resister box from the swap or i heard that u could wire a resister in line if somebody knows how to do this pleassssssse help me thanks alot

kris:cry:

 

[Veryfastsupra1]

come on yall i know somebody has got to know how to this please somebody help me out

 

[aphxero]

Man it's so easy.

Okay so 7m pack has a power input and 3 outputs. You should cut the main power that goes to all of your injectors and use it to feed the pack. The 3 outputs have a red, blue, yellow wire just run each of those 3 to a pair of injectors on the power side. So like red wiore feeds inj1+2, blue wire feeds 3+4, yellow wire feeds 5+6. That's it. The idea is to limit current because the injectors can't handle it. think of it as a restrictor valve, but for electricity.

PLease be aware you'll have to take the harness apart and separate the powers to pair them off.

 

[Veryfastsupra1]

ahhh man thanks alot man i really needed that thanks alot man iam goin to try and jump on that u wouldnt happen to know about how long this should take do ya ??

 

[Turbo Drifter]

How can any one tell you how long its going to take YOU? It may take me 30min and it may take some one else a day. It comes down to how good you are with wiring and how good a job you want to do. Just double check all your wiring and then start it before looming it all up to make sure its running.

 

[Veryfastsupra1]

hey man u didnt have to get all smart ass about it i asked him (about) did u read that part that means like how long should it take ya know so i will know if i want to start in the moring or afternoon so but i do apprecita that info buddy thanks

 

[Slow_Sc3]

depends on where you mount your resister box, just buy 25 feet of 16 gauge ( spool? it think thats what its called ) as that will be more then enough.

 

[Veryfastsupra1]

ok i just out tryin to start on swapin in these 2jz injectors and i thought i had the 7m pack but eveyone is sayin that it has 4 wires coming out of it and the one that i thought was it only has two it look just like the other ones i have saw if anyone can show me a pic of one so i can be sure that would be great thanks kris

 

[GotTurbos?]

Here are two links I found helpful:

http://mkiv.supras.org.nz/articles/injectors.htm

http://www.supraforums.com/forum/showthread.php?t=170792&highlight=resistor+wiring

 

[Turbo Drifter]

hey man u didnt have to get all smart ass about it i asked him (about) did u read that part that means like how long should it take ya know so i will know if i want to start in the moring or afternoon so but i do apprecita that info buddy thanks

Sorry you feel that way it was an honest responce to your quetion. There was no "Smart Ass" intended in it, a smart ass responce would have been to tell you "Search" and offer no insight at all.

 

[Veryfastsupra1]

well sorry thats how it appered to me but like i said thanks for the info man iam goin to need all of it i can get

 

[Veryfastsupra1]

Here are two links I found helpful:

http://mkiv.supras.org.nz/articles/injectors.htm

http://www.supraforums.com/forum/showthread.php?t=170792&highlight=resistor+wiring

hey man thanks for the info i think i got what i need to do this swap of injectors now and again thanks alot gotturbos ok does anyone now know where i could get a 7m resister pack lol !! i know iam askin alot of ?ions but i got to get this right ya know

 

[Frankenstien]

You might have some luck on the classifieds here, or on other online Supra communities. A Toyota dealership may have them as well.

 

[tlo86]

plenty of part outs and junk mkiii's