Im getting a set of nsx headlights but what i want is for the low beams to stay on whether i am in high or low beam mode. Has anyone done this or would know how to set it up?
Headlight Rewire for nsx setup
- Thread starter A70BoosTFienD
- Start date
For lows to stay on with highs, a simple relay setup with a diode will do nicely. Run the diode from the high beam feed wire to the low beam relay and you're golden.
Also, if you're doing the NSX setup, don't use wood for anything.
Also, if you're doing the NSX setup, don't use wood for anything.
shaeff;1658412 said:
hahah...wood...that was my mock up. I should remove that pic before anybody thinks I actually used it. Wood is just easy to manipulate. I replaced the wood with plexiglass onces I figured out the correct thickness.
OP...feel free to take the 2.5 hour trip down to WPB to see how I did mine in person. Its going to be well worth it rather that trying to figured out all of it from scratch or my old pictures.
survyor2;1658978 said:
Seriously. I'm delighted to hear that. LOL. All these years I've been thinking you had wood in there holding it together! I didn't care how good it looked, the wood just turned me off.
i forgot i even asked this lol but @survyor i think i might take u up on that cause i was about to get rid of the lights but i think i might still do it. Thanks for the insight guys def making me want to do it
Sure. You can come take a look. I have one of them out now but you'll get the idea with the one thats in. Let me know if you want to make the trip.