Headlight and lighting/mirrors

[dimixtron]

Okay so I've been searching over and over and can't really turn anything up, excuse me as I am on my phone and that may be the reason why. But I was curious are there any DIY or vendors that sell HID conversion for our headlights with sleepy look? The look I'm going for is like Rodel's. As well, can't turn up anything in regards to LEDs for interior lighting, license plate, and taillights. And finally, any good aftermarket mirrors for our cars?

Thanks guys I appreciate it!

 

[RiyadYar]

no kits for the sleepy eye looks youll have to have it custom done, someone has done a nsx headlight which looked nice but lots of work. same goes for leds in the taillights . as far as mirrors there are some aftermarket options but stock looks best in my opinion .

 

[dimixtron]

no kits for the sleepy eye looks youll have to have it custom done, someone has done a nsx headlight which looked nice but lots of work. same goes for leds in the taillights . as far as mirrors there are some aftermarket options but stock looks best in my opinion .

I know there aren't any kits, but more of if there's anyone who took pics while doing it maybe I can give it a shot. I know there are aftermarket options for the mirrors, but what would they be? J haven't found any. And LEDs for the interior lights? Just looking for a good place to start!

 

[hvyman]

The retrofitsource.com. Not bolt on tho.

 

[AbsoluteSpeed]

For the LEDs: http://www.supramania.com/forums/sh...on-Thread&highlight=light+modification+thread

As for the headlights he used 90mm projectors from retrofitsource.com (like hvyman said). You'll have to fab up mounts, shorten the push rod that raises them and figure out your own wiring.
By the time you're done expect to pay around $1000.

 

[89gte]

Had a friend of mine do a retrofit right 3 years ago. Used retrofitsource.com, he did it all himself and ended up spending in the 350-400 range. I don't know how you would spend a grand on that

 

[hvyman]

Ya. Options are cheap through there. Also depends what you use.

Don't have to shorten the rod either. Tho some do it so it doesn't pop up as much.

 

[AbsoluteSpeed]

Don't have to shorten the rod either. Tho some do it so it doesn't pop up as much.

That is true but it is what I plan on doing. I'm also going to use hella projectors instead.
They won't be HIDs but should be much brighter then stock at half the price of other projectors.

 

[hvyman]

Morimoto minis are 300$. H4 housings are about 25 each. Some glue and shipping and its about 400 for a legit lighting setup.

Quality hid setup is night and day compared to everything else.

 

[89gte]

Morimoto minis are 300$. H4 housings are about 25 each. Some glue and shipping and its about 400 for a legit lighting setup.

Quality hid setup is night and day compared to everything else.

It really is. His lights are 10x better than mine without blinding anybody. He also did his fogs, which some say are kind of useless to do but he uses them as daytime running lights and they look very good. I'm hoping Poodles will make some more kits sometime in the future

 

[Albert]

is350 are shorter than the morimotos and are priced equally used

 

[Poodles]

Rodel used hella 90mm units with an HID conversion in them, not anything from the retrofit source.

 

[dimixtron]

Rodel used hella 90mm units with an HID conversion in them, not anything from the retrofit source.

You make kits poodles? Just going off of what I read a post or two up.

 

[Poodles]

Used to, and I do have the supplies to make more, just little time to do it...