H&R vs Eibach help

[supra8903]

I currently have H&Rs and love the way they look, but its too low, im thinking about getting some Eibachs, what will that gain me..... according to the specs, only 0.1, but i know H&Rs sink to way lower than 1.6", so what are H&Rs really, and what are Eibachs really......


thanks

 

[speed]

I agree, the h&r's are too low. I'd like to know the diff between them and the eibachs too

 

[Ckanderson]

I sell eibachs like their going out of style! Im sure someone has put them on their car and measured.......

 

[supra8903]

anyone

 

[Tun_x]

need a set of front springs only is this possible?

 

[foreverpsycotic]

they only drop it 1.5 or so inches all around, fully settled. i would take a picture of my car right now, but there is no motor in it and you couldnt see anything. i do have some pictures in my build thread you could look at.

 

[Kylar27]

I have eibachs on my car, what should I measure, from top of tire to bottom of fender?

 

[foreverpsycotic]

stick a meter stick on the side of the car and take a picture, covers all bases

 

[NashMan]

i had tried both Eibachs ftw h&r i never like as in handling looks yes other no

 

[Kylar27]

Eibach's springs at 25 1/2" Front and 26 1/2" Rear from ground to top of wheel well. On 17" rims with 245/45/17's tires.

 

[supra8903]

my h&Rs are at 24 7/8 front and same back w/ same tire size


so its about a 1/2" difference

 

[Kylar27]

I like them, but I kinda wish the back was as low as the front. Tho it might help with getting the rear tires too hook.... I dunno

 

[NashMan]

dude compareing ride hight to other will not give you good idea at all cause every car on here will sit diffently
to many varabalies

my h&Rs are at 24 7/8 front and same back w/ same tire size


so its about a 1/2" difference

 

[supra8903]

true.... but it will give you an idea..... its about a 1/2" DIFFERENCE

 

[twinturbozs]

When i had eibachs, the ride was nice and compliant but i hated the raked look. There was too much gap in the rear.

 

[black91turbo]

I have eibachs, they ride great but i think the look of the H&Rs is much better!!!

 

[Ckanderson]

When i had eibachs, the ride was nice and compliant but i hated the raked look. There was too much gap in the rear.

which is why you do eibach's with bilstiens
:naughty:

 

[suprabad]

which is why you do eibach's with bilstiens
:naughty:

How are bilstiens shocks gonna change the ride hight of the spring?

 

[Ckanderson]

you obviously havent seen bilstiens for the supra.........

they have 3 machined in rings for altering the ride height.

 

[MA717MGTE]

you obviously havent seen bilstiens for the supra.........

they have 3 machined in rings for altering the ride height.

pix plz

o yea and i choose eibachs, smoother ride, h&r's bad ass for the drop but ride like a freaking wagon!