Guess My Dyno Numbers

[YouGotSpooled]

Alright well we had a Dyno day here at Performance Plus. Got a free run in tonight. :icon_bigg

Lets do some guessing until I get my dyno sheet scanned and post it up. I want to see how reasonable my numbers are too.

Mods: 3" turbo elbow, 3" downpipe and exhaust all the way to a 2.5" inlet muffler and a manual boost controller set to 10.5psi of boost. Everything else is stock.. for now. The engine has about 55,000 miles.

 

[suprahooked]

246:biglaugh:

 

[OneJoeZee]

230

 

[YouGotSpooled]

No torque guesses? :icon_surp

 

[OneJoeZee]

250

 

[AJ'S 88NA]

232and 218. What do I get if I win.

 

[YouGotSpooled]

You a virtual pat on the back!
And I really dont know how accurate this dyno is lol.

Hint: Torque is higher than HP.

 

[OneJoeZee]

230/250

 

[thechori]

235 hp, 243 tq.

 

[sluggo42]

Alright well we had a Dyno day here at Performance Plus. Got a free run in tonight. :icon_bigg

Lets do some guessing until I get my dyno sheet scanned and post it up. I want to see how reasonable my numbers are too.

Mods: 3" turbo elbow, 3" downpipe and exhaust all the way to a 2.5" inlet muffler and a manual boost controller set to 10.5psi of boost. Everything else is stock.. for now. The engine has about 55,000 miles.

260/266

 

[themadhatter]

250/265

 

[supra_driven]

225whp/242lbs
What kind of dyno was it. That would kinda help out.

 

[CRE]

225WHP/242Lbs if it was a mustang or land and sea dyno....

295WHP/316Lbs if it was a DynoJet. :naughty:

 

[YouGotSpooled]

It was on a Mustang Dyno.
Another hint.. The WHP is lower than all your guesses.. and Torque is above 270. :icon_surp

 

[slidebabyslide]

180/272

 

[mdr40z]

252/278 tq

 

[MassSupra89]

218/273

What gear did you dyno in?

 

[OneJoeZee]

Alright well we had a Dyno day here at Performance Plus. Got a free run in tonight. :icon_bigg

Lets do some guessing until I get my dyno sheet scanned and post it up. I want to see how reasonable my numbers are too.

Mods: 3" turbo elbow, 3" downpipe and exhaust all the way to a 2.5" inlet muffler and a manual boost controller set to 10.5psi of boost. Everything else is stock.. for now. The engine has about 55,000 miles.

Just tell us already.

 

[IJ.]

2 pages are enough for any "Guess my Dyno numbers" thread spill or lock.

 

[tissimo]

270 torque and a bhg on the run so only 140 hp