Well I am testing the waters to see if anyone is SERIOUSLY interested in purchasing my hand built twin turbo kit. I have had a bunch of interested people over the last year asking about the kit or manifolds. I have decided to go a different route with the car.
With stock cams it makes 10psi at 3000 rpm and full boost (20psi) at about 3800rpm. I made about 400 rwhp at 15psi and 502 rwhp at 22 psi. No expense was spared when I built this setup, everything was hand made and TIG welded by myself. It took me over two months to build it from scratch. I took my time and didnt cut any corners.
I will sell it either as the full bolt on kit, or the full kit without the turbo's. It will include the hand built 316 SS manifolds, twin 2.5" SS downpipes, 3" SS midpipe, oil feed and drain lines, block adapter fittings, water lines, 3" SS intake pipe x2, air filters x2 and the first IC pipe where the two merge into one and goes to the IC inlet through the snorkel hole. The turbos are Garret GT28r with a .60 a/r compressor housing and a polished ceramic coated .64 a/r turbine housing, the actuators are 14 psi. There is only about 8000 km ( 5000 miles) on the setup.
$3200 without the turbo's, or $4200 with turbo's. Shipping is extra.
Some pics are on my website in my sig.
With stock cams it makes 10psi at 3000 rpm and full boost (20psi) at about 3800rpm. I made about 400 rwhp at 15psi and 502 rwhp at 22 psi. No expense was spared when I built this setup, everything was hand made and TIG welded by myself. It took me over two months to build it from scratch. I took my time and didnt cut any corners.
I will sell it either as the full bolt on kit, or the full kit without the turbo's. It will include the hand built 316 SS manifolds, twin 2.5" SS downpipes, 3" SS midpipe, oil feed and drain lines, block adapter fittings, water lines, 3" SS intake pipe x2, air filters x2 and the first IC pipe where the two merge into one and goes to the IC inlet through the snorkel hole. The turbos are Garret GT28r with a .60 a/r compressor housing and a polished ceramic coated .64 a/r turbine housing, the actuators are 14 psi. There is only about 8000 km ( 5000 miles) on the setup.
$3200 without the turbo's, or $4200 with turbo's. Shipping is extra.
Some pics are on my website in my sig.
?
