gt4294r with 38 mill gate will it control 15 psi

[NashMan]

Well the title says it all

hot side is 1.01


I am not sure as of yet

here is the gate location



shoot

 

[Prism11]

Most likely not. I'm sure it would control higher boost, since you would need to bypass less exhaust. However with that large turbo and low boost that gate is going to have a hard time, but that large A/R will help

 

[IndigoMKII]

It might be lazy enough to pull it off.. That 42 housing is HUGE and mixed with the 1.01 a/r, I could see 1-2 PSI creep as the RPMs climb though.

 

[Sparky33]

pretty manifold who built it?

 

[Suprapowaz!(2)]

^^^ That's what I said. Do tell.

 

[NashMan]

it's slow 66's old one that ron made

kinda a gamble I say

but it has been coated out I just swap a 46mill gate on it or duel 38's

 

[NashMan]

or ya i forgot i have 11 mill lift cam and 288 dur

 

[VanSupra]

Ron built the manifold for d zamora who I bought it from, now you have it. Say thx for the cams..lol. Also I told you that gate is too small.

Cheers!