GT30R JZ MKIII (stage 2 in slow progress!)

rice or nice?

  • rice

    Votes: 65 40.9%

  • nice

    Votes: 94 59.1%
  • Total voters
    159
Status
Not open for further replies.
Xistant

Xistant

xistant
Jun 6, 2005
810
0
0
melbourne
sds
So...

yeah well it all started some 4 years ago, with the purchase of this!
stock as a rock 7mge 86 oct build and auto. brought some gay 17inch pencil dick rims that looks alright but hey we all start off stupid in the beginning :p
2088146_24_full.jpg

2088146_137_full.jpg


then a few months down the track had a minor front accident. & a jza70 halfcut came up for a too good to be true price and the money was laided! (some bonuses came from the cut too! like a spare blitz ECU & steeled turbo's!)

2088146_136_full.jpg

2088146_138_full.jpg


so started the usual process of stripping the car to do the swap, but thought fuck it lets paint the hoebag while im at it. yes i love the colour purple! yes its the colour of fag's death, hobo etc etc and of course royality ;) so blow me if you don't like the colour!
2088146_22_full.jpg

i picked up a custom bullshit frontbar, that at the time IMO thought the ducting was great/ and from angles it looked the goods.
2088146_20_full.jpg

2088146_25_full.jpg


not much more really to say other than over time BPU mods were done, until the poor steels wouldn't make more than 10psi of boost which was the results of the front turbines being smashed up to all buggry! so swapped for a set of ceramics for a while, but just got home from a long day at work when as i was about to open the door...... SMASH! hit on the side of the road by a 80odd lady in a tank!
2088146_111_full.jpg


so after 4months of sorting out insurance and wasting my time with the panel beater she was back in my hands to drive again!
2088146_56_full.jpg

2088146_55_full.jpg

anyhow the bad luck didnt stop there, exactly a week later after getting her back from the panel beaters, i hit a pvc pipe on the freeway :( made a mess of the front bar (bad photo but bar is cracked to shit)
2088146_54_full.jpg
 
Last edited:
Xistant

Xistant

xistant
Jun 6, 2005
810
0
0
melbourne
sds
so after a while i finally got the advans, took forever to get the right set (18x8.5 & 9.5)
2088146_91_full.jpg

2088146_93_full.jpg

2088146_94_full.jpg

2088146_96_full.jpg


so finally i started to think well, turbos are making some funny noises and thought best to proceed to the next step and go single.

and not too long a GT30R and Tial 38mm WG came up for grabs basicly new.
2088146_113_full.jpg

2088146_115_full.jpg


and just some more photos for you to enjoy.
2088146_127_full.jpg

2088146_129_full.jpg




engin bay with wiring removed.
3072322_84_full.jpg

3072322_85_full.jpg


some short vids
http://www.youtube.com/watch?v=s6qD3AWT5I8
http://www.youtube.com/watch?v=P6R_ZB43XbE
http://www.youtube.com/watch?v=khwGjTnv-1I

still got alot more work to do which wont end for quite some time.


so far the specs go

jza70 full swap (exterior & interior etc) to 89spec
bilstein r suspension (rock hard boat!)
Blitz modded ECU
Greddy e-01 Boost controller
440 2jz inj
4in intake with pod
GT3082R Garrett turbo
Tial 38mm Wastegate with screamer
unknown manifold(ex) but seller claimed it was HKS modded.
2.5 alu cooler piping
ARC jza70 FMIC
semi solid byteme engine mounts
DBA slotted front rotors
random pads (that work quite well actually better than my priors)
braided brake lines
personal steering wheel.
R recaro's front and rear.
mines front brace & rear
unknown brand rear seatbelt brace
RS*R 3inch cat back exhaust system to 5inch MUFF! :D
3inch DP
free flowing cat
advan 18's 8.5 F (235's) & 9.5 R (265's)
heavy duty clutch
single tail shaft
jza70 tosen 3.9 gears


shit to install
HKS twin plate (need to get a rebuild for it)
Turbo A duct (copy)
shine auto frontbar (as per pic above stage 2)
do-luck rear pods
fidanza cam gears
rear sunshade
hydro water pump

shit to fix
radiator support
now stopped leaking waterpump (hydro)
relocate p/s res and hydro res to drivers side front where overflow bottle is.
leaky hatch Grrr!!
rear tail light

and TLC on the exterior and paint






anyhow enoughfor tonight enjoy or not.




















and stage 2 (in progress) concept photo (edited of another users photo)
2922017_40_full.jpg
 

Attachments

  • IMAG0065.jpg
    IMAG0065.jpg
    313.9 KB · Views: 210
Last edited:
Justin

Justin

Speakers?
Mar 31, 2005
1,699
0
0
40
Spokane, Wa
looks like you've got a nice car man. I'm not a fan of that bumper but I'll bet it makes the IC nice and happy :D
 
lagged

lagged

1991 1JZ
Mar 30, 2005
2,616
0
0
38
new rochelle
car WOULD be clean, except for that ugly ass bumper! make your car wonderful and replace that nasty shit with the stock bumper, or a more tasteful aftermarket piece.
 
supraman7mgte

supraman7mgte

Shut up,bitch!!
Apr 1, 2005
1,753
0
0
Sunny California
Really nice color on the car,but I agree,the front bumper covers not my style. I'm going to install a nice Bomex lower and a set of side skirts,THEN i'll be stylin'!!(with a set of springs and shocks to...
 
lagged

lagged

1991 1JZ
Mar 30, 2005
2,616
0
0
38
new rochelle
1JZDRFT said:
1jz ladies :)


thanks for the comments, each to there own i guess :)


i love the front bar, says "open wide" air inside" lolz
Click to expand...

ill tell you what though, you have a great attitude. for instance, the comment i made was simply my opinion, and no harm was ment by it. however many many people in your position would get offended and upset. they dont realize that when they ask for people opinions, thats what they are going to get.

at any rate, good luck with the car!
 
SupraMario

SupraMario

I think it was the google
Mar 30, 2005
3,467
6
38
38
The Farm
out of every1 here lagged, GJ, CT ect: none of u caught or im assuming u didnt catch his bumper is installedon the wrong year.
u have an 87-88 model, ur after market bumper is for an 89+, thats why it doesnt fit properly.
make it fit better and get rid of the slouch from the blinkers down and it will look badass.

so far it look nice.
 
lagged

lagged

1991 1JZ
Mar 30, 2005
2,616
0
0
38
new rochelle
D34DC311 said:
out of every1 here lagged, GJ, CT ect: none of u caught or im assuming u didnt catch his bumper is installedon the wrong year.
u have an 87-88 model, ur after market bumper is for an 89+, thats why it doesnt fit properly.
make it fit better and get rid of the slouch from the blinkers down and it will look badass.

so far it look nice.
Click to expand...

um.... NO!

89+ style bumper will bolt up no problem to a pre 89 mkiii.

the fitment of the actual bumper he is using however, is an issue all its own. i cant really tell if the fitment is that bad, however that would be a manufacturing or installation problem.

the year has nothing to do with it
 
Status
Not open for further replies.
Top Bottom