greddy boost cut speed cut part numbers

[toyotahachiroku]

i have a jza70. have been looking around for a greddy boost cut and a greddy speed cut for my car recently. but there seems to be different part numbers and superceeded numbers. just wondering which part numbers are still available and which ones are the correct ones for a jza70 rhd with manual transmission.

boost cut greddy 15510018
speed cut type a 15590201

im not sure if these are right. i got them from the japanese trust/greddy site. but there is no listing for the boost cut in the english site though. and when i try to order 15510018 from a local greddy retailer, they say it doesnt exist. please let me know which are right and where i could buy them online. thanks

 

[foreverpsycotic]

I know that the MKIV croud has had a great sucess with using the MR2 turbo BCC, you might want to look into using one as they are able to set where BCC kicks in.

 

[annoyingrob]

If the MR2 boost controller works on the MKIV, it'll work on our car too.

In fact, I'm almost 100% sure that the MR2 speed cut works on the 1JZ too.

 

[AGlobalThreat]

You want the SW20 (MR2) BCC.

I'm using it on my 1jz with no problems and no boost cut.

Not sure about part #'s or speed cut removal.

 

[Dylan JZ]

Driftmotion has the trust speed cut defender that is compatible with the 1JZ.. RHDJapan.com has the boost cut defender. Both for manual.. The thing to remember here is that these controllers work for a few different cars. My SCD works on an Mr2 and a few other cars IIRC.

Plain and simple.

 

[BlackMKIII]

I bought a SW20 BCC and it doesn't look like the one the MKIV guys are using. Here is the eBay ad:

Link

But the one I got has only 4 wires. a green one, a white one, a red one, and a black one. No connector. I know what the red and black ones are for, but where do the green and white ones connect to?

 

[Dylan JZ]

I bought a SW20 BCC and it doesn't look like the one the MKIV guys are using. Here is the eBay ad:

Link

But the one I got has only 4 wires. a green one, a white one, a red one, and a black one. No connector. I know what the red and black ones are for, but where do the green and white ones connect to?

sigh.

 

[BlackMKIII]

What? What did I do wrong now? I wouldn't think it goes to the MAP sensor, right?

Edit: Or maybe that is exactly where it does. :dunno: ::dunce::

 

[Dylan JZ]

What? What did I do wrong now? I wouldn't think it goes to the MAP sensor, right?

Edit: Or maybe that is exactly where it does. :dunno: ::dunce::

http://www.greddy.com/img/PHP/products/pdf/683.pdf

 

[BlackMKIII]

:bowdown: Thanks!

 

[Dylan JZ]

another that I used: http://www.mkiv.com/techarticles/bcc/bcc_install/bcc_intro.htm


Greddy's article isn't too helpful IMO.

 

[tlo86]

good show

 

[Dylan JZ]

Also, there is a "JZA70 boost cut limiter," I own it brand new from japan.. However, I'm pretty sure its just labeling.

Doesn't have a P/N, my SCD does though.. thats the only odd thing.


PIC:

 

[OneJSupra]

where did you buy it from?

 

[Dylan JZ]

where did you buy it from?

you have PM.

 

[BlackMKIII]

But it's the same as the 3SGTE one, right? Mine works perfectly.

 

[OneJSupra]

But it's the same as the 3SGTE one, right? Mine works perfectly.

probably is and if the 3sgte one works that's all it matters.

good find though Dylan, and thanks.

 

[Dylan JZ]

But it's the same as the 3SGTE one, right? Mine works perfectly.

Everything I've seen leads me to believe there's no difference, you're just fine haha..

 

[Adrian98]

all the GTE motors seem to work the same. i have a MR2 one i used n a 1j then it went back on the mr2 but the mr2 got crashed so i'm left with no home for my boost cut controller

 

[AGlobalThreat]

all the GTE motors seem to work the same

It will not work on a 7m