not sure what kinda 60-1 kit you have but here are the fittings for the 7M
Oil Feed
1/8 NPT Turbo Oil Port (on top of turbo)
12MM to -4an Block oil Source (Rare, custom made for 7m)
-4an hose (some will run -6an but Caution, You maynot get enough oil pressure to feed the turbo)
Oil Return
Flange with 1/2" Barb for Oil return (bottom of turbo)
Flange with 1/2" Barb for Oil Return Block (special Spaced holes for 7M block)
-10an hose for oil return
Water
2 x 16MM water inlet fittings on Turbo (Side to side)
Or
2x 3/8 NPT Water Inlet fittings (some turbos)
12MM to -6an Water Return (thermostat housing)
14MM to -6an Water Source (behind waterpump)
-6an water hoses