Fuel Rail Thread Sizes

[TomFraser]

I am putting on an AFPR and have all the lines setup, I need 2 adapters to replace the dampener and the stock regulator, but cannot find out what the sizes are for those two inputs.

Does anyone know what size thread they are? I can bring the rail to a hardware store and find the right size, but I'm hoping someone knows off the top of their head.

http://www.anplumbing.com/shop/index.php?shop=&dept=Metric

Is the website i'll be ordering from.

Thanks

 

[gofastgeorge]

Well, first off, it's metric of course, and I see no metric to AN fittings on that site at all.
Find someone who sells Aeroquip fittings, and you will find what you need.

 

[honestabe]

Talk to Driftmotion, they carry what you need. Look up their fuel dampener bypass. I have this, along with their Aeromotive FPR kit, -8 fuel rail fittings (bought my fuel rail separately, although they carry -8 fuel rails), and all the other stuff that's needed.

 

[TomFraser]

yeah... I looked at their kits, I have all the parts except these two adapters, which cost about 10 bucks, don't want to spend all the money on the kit just to use the two fittings.

 

[honestabe]

Give Aaron a call, he'll get you what you need. I had to do the same with my setup.

 

[a10secstreetcar]

Driftmotion is the way to go for all of your needs / wants!

 

[92nsx]

12 MM X 1.25 is the thread size for the FPR. I have the other size written down in the garage. I will find it when I go out there.

Also most go with -6an for the fuel system, not -4an

EDIT: The dampener is 14M X 1.5

 

[TomFraser]

12 MM X 1.25 is the thread size for the FPR. I have the other size written down in the garage. I will find it when I go out there.

Also most go with -6an for the fuel system, not -4an

EDIT: The dampener is 14M X 1.5

sweet... thanks especially for taking the time to look