ok today i just finished up my head gasket job and everything else and here i am trying to start it and it wont start. ive checked all fuses and wiring they are good. so what do i do now? bad fuel pump or what.:3d_frown:
You need 3 basic things for a gasoline engine to run. spark, fuel and compression. check to see if you have spark, then check your fuel pressure. then compression test. Assuming you have ruled out all stupid reasons for a no start. It does crank right?
You need 3 basic things for a gasoline engine to run. spark, fuel and compression. check to see if you have spark, then check your fuel pressure. then compression test. Assuming you have ruled out all stupid reasons for a no start. It does crank right?
I got good spark and compression but no fuel pressure basicly no fuel at all but i took the fuel gauge thing out of the gas tank and i noticed it was badly rusted so i think thats my problem. i can spray gas into the 3000 pipe and it will fire right up and run as long as im spraying gas.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.