fuel fittings

[mista_sup]

been trying to find a fuel fitting to go on my fuel rail to hook up my afpr and wanted to know if anyone knew where i could find one.:1zhelp::1zhelp:

 

[figgie]

12mm x 1.25

 

[mista_sup]

12mm x 1.25

i know the size. one of you guys gave it to me a few weeks ago but i cant find it any where.

 

[figgie]

summitracing
jegs

it is a russells part #

 

[mista_sup]

bump

 

[Halsupramk3]

here is a illustration i got from some member here. the carb adapter needs to be drilled out a little bigger and the tip cut off so its not too far into the rail. you can measure it to see what needs to be done.

you dont have to use the FP adapter if you dont have the gauge. also the measurements for the fuel lines may be too short. the line coming out of my AFPR is much longer than 12"s so i ordered more -6 line than noted in the drawing.

this should give you a good starting point of what to get. the carb adapter and the swivel on the front are key parts.

 

[sneakypete]

does anyone know what size line i should run to the pump if i want to replace factory hardline from tank engine.... or maybe a write up. i just need to know the basics such as diameter or fuel line, fittings needed, etc.
any help would be great.
-pete

 

[92nsx]

here is a illustration i got from some member here.

Thanks for posting this. This time I saved it to my computer so I can find it later.