Front Windshield Moldings

[Boombastic]

Hi there, nothing too complicated but is complicated for me since I can't figure it out. Anyways how does the front windshield moldings actually attach themselves? Mine has fallen off on the DS due to some snow we had. Is it some adhesive? Or the gunk around the window? Thanks for the help.

 

[gaboonviper85]

They clip to the edge of the glass...generally the widshield adhesive also helps hold them in...a careful yank will get them out but generally they won't go back in unless you remove the windshield.

 

[mista_sup]

latly mine have been rattling and i can't seem to get them to stop. wanted to glue them but have no place to put the glue.. so when i go about 80mph thay rattle

They clip to the edge of the glass...generally the widshield adhesive also helps hold them in...a careful yank will get them out but generally they won't go back in unless you remove the windshield.

 

[mista_sup]

latly mine have been rattling and i can't seem to get them to stop. wanted to glue them but have no place to put the glue.. so when i go about 80mph thay rattle

 

[gaboonviper85]

then i would peel back the edge without ripping it out and run a small bead of silicone under it....

 

[modmonster2008]

so how does it go back in if it usually wont go back in without removing the windshield?

 

[Poodles]

Held in with clips. They do fall apart and the clips break or rust as well...

 

[Boombastic]

Hmmm well I don't want to remove the windshield so I think this may be a case of trial and error with some products. I am thinking double sided sticky tape lol..... something like used with aftermarket spoilers. Thanks for the help everyone.