found a turbo

[JStoked]

I found a holset hx-27 for 350 brand new. Would this be a good investment? Just reminding every one i have 550 injectors, lexus maf ,neo, block is bored 40 over with forged pistons, clevet bearings,upgraded ic piping with a huge ic, innovated wide band, aem true boost,hks 2mm head gasket, all arp internals.
I just want to know how well this turbo will work? and what kind of flang i will need?
also whats the hp rating on it.

thanks jeremy

 

[metaphysico]

I think it will be too small of a turbo, check into the hx35 or hy35 on the forums.

 

[Supracentral]

The Holset HX-27 is good for 0.23 kg/s of airflow. That's way too small for a 7M.

 

[JStoked]

ok thank you guys i will check into those turbos.

 

[enjoi.this]

HX40 on a 7M would be even better yet. One of my buddies got one for $500 brand new. Just gotta hunt around a bit.

 

[JStoked]

found a hx-35 for really cheap. Will my mods work with this? Also what am i going to need as an exhaust flange and manifold?

---------- Post added at 09:11 PM ---------- Previous post was at 09:00 PM ----------

Ok never mind ill do my reading i found the posting on it. i really think this is the turbo i will go with for now.

 

[enjoi.this]

What a few local ppl did was buy an e-bay T4 manifold and weld a T3 flange on.

 

[FullNelson]

There are also ct26 to t3 adapters spread out on ebay to let you keep your stock manifold if desired

 

[enjoi.this]

Do those adaptors for the ct26 mani still give you enough clearance between the turbo and intercooler piping if you not ffim ??

 

[D.J.T.]

But wouldn't those adaptors only work for Turbos with Internal wastegates?

 

[ATL88Supra]

But wouldn't those adaptors only work for Turbos with Internal wastegates?

correct

 

[enjoi.this]

But wouldn't those adaptors only work for Turbos with Internal wastegates?

Im pretty sure you can buy these adaptors that have an external gate flange. I wouldnt run a Holset on its internal gate since they are shitty. Like to spike and boost creep lots..