Foglight question

[RazoE]

yup, it's pretty simple and pretty cool..

I think only German cars have blinking rear markers (not the Supra, but I've seen German Corvettes with amber rear signals)

 

[RazoE]

here you go..

http://www.youtube.com/watch?v=5_gZ...ube.com/user/RazoE&feature=player_profilepage

 

[Alec]

here you go..

http://www.youtube.com/watch?v=5_gZ...ube.com/user/RazoE&feature=player_profilepage

Do you have a write-up on how to do it? Do you think it's worth it to do the rear ones also? That may be confusing, I've only seen cars that have it on the front side makers.

 

[RazoE]

it's very simple, cut the white ground wire off the side marker (front or rear), and tape off the part going to the body...

attatch a 16 gauge wire to the other end, and splice that into the green signal wire on the turn signals, and that's it..

works for the front and rear...


http://www.spooledup.com/content.php?goto=./sidemarkers/sidemarkers.php

I've done all 3 of my Supras, and a few others and it takes me about 5 minutes per side..

 

[Alec]

it's very simple, cut the white ground wire off the side marker (front or rear), and tape off the part going to the body...

attatch a 16 gauge wire to the other end, and splice that into the green signal wire on the turn signals, and that's it..

works for the front and rear...


http://www.spooledup.com/content.php?goto=./sidemarkers/sidemarkers.php

I've done all 3 of my Supras, and a few others and it takes me about 5 minutes per side..

I know some people don't like this mod. Why doesn't everyone do it if it's so easy? Why did you do the rear? It only makes sense to do the front.

 

[RazoE]

Cause I can..

It just gives me a little extra piece of mind..

I'm awaiting for my JDM/Euro bubble side markers for my black car, as those work EXTRA well with the side marker re-wire (I have bubble markers on my white and blue Surpas)

 

[Alec]

Cause I can..

It just gives me a little extra piece of mind..

I'm awaiting for my JDM/Euro bubble side markers, as those work EXTRA well with the side marker re-wire..

Piece of mind? lol. I think it would confuse other drivers if I did the rear.

 

[Alec]

it's very simple, cut the white ground wire off the side marker (front or rear), and tape off the part going to the body...

attatch a 16 gauge wire to the other end, and splice that into the green signal wire on the turn signals, and that's it..

works for the front and rear...


http://www.spooledup.com/content.php?goto=./sidemarkers/sidemarkers.php

I've done all 3 of my Supras, and a few others and it takes me about 5 minutes per side..

How do you splice the 16 gauge wire into the green wire from the turn signals?

 

[RazoE]

here's a vid at night..

http://www.youtube.com/watch?v=x7AX2vC9eFQ

 

[flyguyaaron]

Does any one have HID's in there fog lights wired that you can turn just them on?