fog lights rewire

doom26464

Research...research
Mar 31, 2005
863
0
0
38
Saskatoon SK, Canada
www.cardomain.com
previous owner did some sort of hack job wiring so they only worked sometimes. SO i ripped out all the wiring for them. Now I would like to re wire them but what can I wire them into? I don't care if there on all the time thats fine by me. There are also some sort of round aftermarket fog light.
 

Ish

SM Pimp
Apr 5, 2005
110
0
0
Socal
If the aftermarket fog lights work, I would remove those and use the wiring and switch for those.
 

CyFi6

Aliens.
Oct 11, 2007
2,972
0
36
Phoenix
www.google.com
im sure you could run a relay off somethingin the engine bay electrical box, just use a testlight or voltmeter to see what has power only when the key is on, or only ground when the key is on, then run a relay off of that dont tap directly into it
 

Dan_Gyoba

Turbo Swapper
Aug 9, 2007
1,836
0
0
Alberta
www.gyoba.com
What I'm reading is that you don't want to bother with a switch, you just want the fogs to come on when the ignition is on, and off when it isn't, correct?

1. Use a relay. There isn't really anything suitable for direct power use, but there may be a few things that can you can use a relay from.

The tach signal (the neg terminal on the igniter, also avaolable at the diagnostic plug) only has a positive signal at all when the ignition is firing. A diode and a capacitor would smooth this out to be a good enough signal for a relay. No ignition, no fog lights. This would mean that the fog lights are on only when the engine is actually running, and not just when the ignition switch is on.

I have mine wired to an ignition power source in the dash, going to the factory fog light switch, so I can switch them off if I want, but then I'm not all that bothered by running yet another wire to my dashboard. ;)
 

Loki

The Future is Unwritten
Mar 30, 2005
2,766
6
38
39
Prince George, B.C.
doom26464;959080 said:
I was just thinking the exact same thing. not sure wich wire is ground and wich is postive though but I will figure it out.



If it wasn't snowing I'd go outside and take a look at which ones I spliced into.
 

OfnaRcR4

Shea!
Oct 2, 2006
1,340
0
0
kettering ohio
I doubt the previous owner ripped them out all the way back to the source? There has to be some origional wire somewhere left. I'd say try to find that.