Finally my 7M on the dyno.

[Reg]

Finally had my 7M on the dyno since it was tuned about 4 years ago. Through alot of part replacements and tweaks here and there i was surprised how well it still maintained.

7M-GTE ( Yes the HG was done RIGHT )
@16psi on 93 pump (Next time i will bump it up to 20 with a couple gallons of 110)
650cc, Full 3" Exhaust, 63mm Precision turbo, small dinky spearco IC but it does what it needs!
SAFC-II
And yes this car is my daily....! Trying to save for an actuall daily but i cant help but want to keep sinking money in this damn thing haha

[video=youtube;kDlujnlqinM]http://www.youtube.com/watch?v=kDlujnlqinM&feature=plcp[/video]

Dyno Sheet

 

[peste noire]

so you have a stock ct26??

 

[mk3-4-me]

he says he has a 63mm Precision. Seems a lil low, i made 391 RWHP at 15 PSi on a PTE 61mm but then again i tuned it pretty well, and my AFRs were at 11.6 \

good job though!

 

[Reg]

he says he has a 63mm Precision. Seems a lil low, i made 391 RWHP at 15 PSi on a PTE 61mm but then again i tuned it pretty well, and my AFRs were at 11.6 \

good job though!

Yea its a 63mm ct-26, and yea i was totally expecting higher than 347. When i had it first tuned 4 years ago it put down 381 @16psi. Definitely going to have to tweaked a bit more sometime soon.

 

[te72]

What is up with the camera distorting when you let off? Is that 7m trying to suck it in too?

 

[SupraMedical68]

Yea its a 63mm ct-26, and yea i was totally expecting higher than 347. When i had it first tuned 4 years ago it put down 381 @16psi. Definitely going to have to tweaked a bit more sometime soon.

looks fine too me, it'd probably be closer to 400whp if it was on a Dyno Jet.

Also, it's not as if a dyno's settings can't be distorted to read higher or lower, not to mention any other variables.