i have a 7mgte supra with the bosch 044 inline pump upgrade.i have apexi safc controlling fuel.I've tried to dial fuel out but still file plugs. chg the plugs the car runs but low idle can't adjust idle. the car stalls sometime and can't get it to crank bck until let it sit for awhile. Have fuel pressure reg. adjusted to 24psi. Could someone help me.
filing out plugs
- Thread starter 7mgt45r
- Start date
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Fletch124;1052419 said:Are you using a wideband....?
yes i'm using aem wideband
IJ.;1052477 said:Is the J tube still in the return line?
no straight to the fuel rail with -6 line
Aeromotive AFPR?
If so, those have a tiny return that can only be seen when you take them apart. Only way to lower fuel pressure below 37 psi is to bore it out some.
If so, those have a tiny return that can only be seen when you take them apart. Only way to lower fuel pressure below 37 psi is to bore it out some.
My Aeromotive has no problems idling with 1000cc RC's and both the 040 and 044 pumps running.
I run a -6 return right to the tank and only see a 1Psi change between 1 pump and 2.
I run a -6 return right to the tank and only see a 1Psi change between 1 pump and 2.