FFIM / TB/TPS question

[mazzer]

I've begun making my own FFIM(7m car) and had a question regarding the throttle body and TPS. i see numerous people doing the Q45 TB and was wondering how i could integrate the Nissan TPS sensor with the stock ECU. the car will also be running with an AFC neo for a short time untill i MAFT it

TIA

 

[turbogate]

I've begun making my own FFIM(7m car) and had a question regarding the throttle body and TPS. i see numerous people doing the Q45 TB and was wondering how i could integrate the Nissan TPS sensor with the stock ECU. the car will also be running with an AFC neo for a short time untill i MAFT it

TIA

Pretty straight forward, just extend the TPS harness to the new location of the TB and use this thread for the wiring and tips.

http://www.supraforums.com/forum/showthread.php?t=321855

 

[mazzer]

cool. thanks man!

 

[Enraged]

go with a BBK mustang throttle body if you can afford it. the Ford TPS can be wired into the stock ECU (search, theres a howto about it) and you end up with a brand new shiny throttle body, plus the fact that since its a standard bolt pattern, you can go with a 65mm TB now, and then upgrade to a large one later if you need to, without changing the flange.

just my $0.02

 

[shaeff]

^yep, i'm running an accufab 75mm TB.

 

[mazzer]

cool guys. ill look into it!

thanks!

 

[Cya]

If I thought about it a little longer, I would have gone the mustang TB route.

 

[starscream5000]

Just remember the Mustang TB's are know to have a very irritating whistle to them, but don't let that hinder you from your quest for power