FFIM PCV plumbing

[black91turbo]

could I please see some pics as to how I should route the PCV system when installing my FFIM....explanations would do too

 

[Fletch124]

Dont worry about it. Just get your self a catch can, line coming from the accordian pipe to the top of the catch can. A line from each valve cover to the side of the catch can.

 

[MA70witBoost]

Dont worry about it. Just get your self a catch can, line coming from the accordian pipe to the top of the catch can. A line from each valve cover to the side of the catch can.

Dont think thats right. 7M's PVC systems are through the throttle body not the accordian tube.

 

[black91turbo]

that was my concern....the Q45 TB does not have a port for the PCV.

 

[7Mboost]

that was my concern....the Q45 TB does not have a port for the PCV.

Val, I run my PCV like Fletch said and I've had no problems with it. You can run it from cam cover to catch can to intake manifold which is what I've red is the proper way but double check me on that, jdub could give you all the info you need on this, send him a pm.

 

[black91turbo]

Val, I run my PCV like Fletch said and I've had no problems with it. You can run it from cam cover to catch can to intake manifold which is what I've red is the proper way but double check me on that, jdub could give you all the info you need on this, send him a pm.

thanks man....

 

[tissimo]

Generic pvc valve at the parts store and run a vac line to it.