FFIM and EGR valve???

[92nsx]

I am getting ready to install my FFIM and have no idea what to do with the EGR "stuff, valve" since the valve bolts into the upper part of the OEM manifold and now with the FFIM there is no Upper, DAH!!!
What should I do with the EGR stuff. Remove it, make block off plate, any problems with doing this. Any way to keep it?

If anyone has a pic. of the EGR setup with a FFIM that would be sweet. Maybe one with egr and one without it.

Thank you

 

[GrimJack]

Unless your FFIM has the EGR port, you'll need to block it off at the head.

 

[jdub]

Start reading at post #33:
http://www.supramania.com/forums/showthread.php?t=63558

 

[92nsx]

Jdub thank that is what i was looking for. I saw the thread above but didnt read into it, i thought as the title said it was about ""another ebay product"" . This is now making me think, I just might bring the pipe to the front of my FFIM and run the pipe under the manifold.

Thank you

 

[jdub]

Good luck routing the pipe under...I tried to figure out a way to do that and it just didn't make sense with the way the EGR valve sits on the head and the outlet to the plenum is positioned. Remember to apply the KISS principle