Error 11

[AZN MK3]

Ok Error 11 says that I either have a loose wire somewhere or my main relay is messed up. By main relay they are talking about the EFI relay in the fuse box in the engine bay right? I also cleaned the ecu ground that's on the intake, even checked to see if its grounded right and it is. It's giving me a 12v reading, so would the relay be bad? If so is there anyway i could test it to see if its still good? I just need someone to shed some light on my problem.. Thanks...

 

[JesseH]

Check the main relay in the fuse box, its the round one. Check your TSRM and it will give you the steps to test it with a multimeter, or you can pick a new one up at the auto parts store for around 12 bucks.

Also, check your grounding points the one on the rear of the intake manifold is a big one, also check the one that is under the fuse box area.

 

[AZN MK3]

Check the main relay in the fuse box, its the round one. Check your TSRM and it will give you the steps to test it with a multimeter, or you can pick a new one up at the auto parts store for around 12 bucks.

Also, check your grounding points the one on the rear of the intake manifold is a big one, also check the one that is under the fuse box area.

cool thanks... appreciate it...