engine help

T

thunder_nick

New Member
Jan 27, 2008
77
0
0
Marquis Sask
i have the 1jz twin turbo engine.. my harmonic balancer blew apart on me today... i am looking at drift motion and found a few different options on there.. i have the factory one.. http://store.driftmotion.com/static/i-1jz2jzstockcrankpulley.php
then there is the underdrive one..http://store.driftmotion.com/static/i-1jz2jzlightweightunderdrivecrankpulleyv206061aluminum.php

is it better to go with the under drive one then the factory one to avoid it blowing apart again? apparently its a problem with these...

i also need the center support bearing for my drive shaft.. is it better to just get the steel one???http://store.driftmotion.com/static/i-3insteel1pcdriveshaft.php
i know the aluminum is the better choice but money is short right now...
the factory toyota one here is going to run me over 500
( I LIVE IN CANADA)

I would appreciate any help as soon as possible as i need to get the car up and running again soon.. thanks again..

if you have any other ideas let me know..
 
T

thunder_nick

New Member
Jan 27, 2008
77
0
0
Marquis Sask
so i was reading up on the underdrive and it sounds like if your engine is not internally balanced it can cause issues.. so is our engine internally balanced? or is this underdrive a bad idea? last thing i need to do is do some damage to the car further
 
T

thunder_nick

New Member
Jan 27, 2008
77
0
0
Marquis Sask
yea the ati is def one i will go with later..the guy who sold me the car is selling me a used one for 150 for now..i hope it lasts a little while.. then maybe i will buy the ati one later....
thanks for all your help and those sites are great reads...
 
You must log in or register to reply here.
Top Bottom