Engine bay in stock form request.

[upgradedsupra]

I am looking for a picture of a white engine bay, preferably stock. All sensors, and stuff still in place, and clean.

I have many asking what the OEM bay looks like (for people that don't know Supras) when I am out to gatherings so I want to have one to compare to mine. If a pic is provided, I would go a bit further as to ask for it in hi res too.

Thanks
Duane

 

[Poodles]

I have an old pic but it's not white and it's not 100% stock...

 

[adampecush]

if nobody posts in the next few days, I'll scan and upload a pic I had of my first supra's engine bay. (I'm in calgary right now) 89 turbo with 160k km. The engine bay was mint.

 

[hvyman]

mostly stock from what you can see.

only mods are apexi intake, 3indp, 3in catback, lower ic hard pipe, 57trim, greddy type s bov. everything else is bone stock.

 

[JDMMA70]

Cant get any better than this

 

[Poodles]

Yep, that would be the best.

Still running original battery terminals, the only nitpick parts I have is the power steering res. and the oil fill cap.

But definately quite nice...

 

[adampecush]

Cant get any better than this

mine had a toyota battery:sarcasm:

 

[upgradedsupra]

Cant get any better than this

Awesome, and very clean too! Thanks!

Stock vs some extra work. It's nice to see the difference of how far it has gone too.

Duane

 

[hvyman]

how does your radiator work? i've never seen the inlet/outlet side by side like that before.

 

[upgradedsupra]

^^ It is a custom dual pass rad with 2 top feeds rather than a top and bottom. The unit fits under the rad support.

Duane

 

[hvyman]

oo ok gotcha. so it goes in down then back up and out right?

 

[sous]

I am looking for a picture of a white engine bay, preferably stock. All sensors, and stuff still in place, and clean.

I have many asking what the OEM bay looks like (for people that don't know Supras) when I am out to gatherings so I want to have one to compare to mine. If a pic is provided, I would go a bit further as to ask for it in hi res too.

Thanks
Duane

your is stock duane :icon_bigg

 

[jimi87-t]

I am looking for a picture of a white engine bay, preferably stock. All sensors, and stuff still in place, and clean.

I have many asking what the OEM bay looks like (for people that don't know Supras) when I am out to gatherings so I want to have one to compare to mine. If a pic is provided, I would go a bit further as to ask for it in hi res too.

Thanks
Duane

I've been meaning to ask the same thing but keep forgetting, no one that sees my car has a clue as to the work done

 

[Nick M]

All sensors, and stuff still in place, and clean.

I think that white bay looks correct. But I also have some side angles, showing the sensors and hook ups of various things. Only thing is the K&N and shield the previous owner put on.

The pics are 4 years old, but I think everything is in order. I have some smaller ones, things like the j-tube and wire looms that are grounds for refrence.

 

[Nick M]

Cant get any better than this

http://img.photobucket.com/albums/v436/Cobra281s/Hoses9.jpg[IMG]

:thumbup:

 

[Poodles]

Only nitpick is the O2 sensor wire and the brake master (res. is wrong, and it looks different as well).

Anyone else notice that the connector on the wiring harness to the coilpacks has the same connector as the CPS and it has a provision to clip onto a bracket but there isn't one to clip it to?

I need to get one of those holddowns for where the main engine harness comes down by the EGR...

 

[GrimJack]

And he's removed the VSV that controls the heater core coolant valve, and just plumbed the thing straight to vacuum.

 

[Poodles]

it's also missing the engine lift hook on the alternator bracket

 

[Guyana00]

I see you used this thread as an excuse to post pics of your setup again Duane......



Awesome....

 

[got_boosted]

I see you used this thread as an excuse to post pics of your setup again Duane......



Awesome....

LOL really... He just needs to post of a bunch of pics and stop teasing. It looks great!