Any know of an affordable way to eliminate the MAF. The HKS VPC was brought to my attention but is the any other way?
Eliminating the MAF
- Thread starter mcpcola
- Start date
And it can be purchased here: http://www.fullthrottlespeed.com/
You'll also need a GM MAF from ebay, they can be had pretty cheap now and then.
You'll also need a GM MAF from ebay, they can be had pretty cheap now and then.
It's an add on computer. It plugs in between a GM MAF and your old AFM sensor plug, removing the AFM entirely.empera said:
with the MAFT your still using AFM but its a GM hotwire type and can be used in a blow thru setup to be more efficent and its less restrictive to begin with. The only real ways to get rid if it all together is a PHR MAP ECU, HKS VPC, standalone set to speed density, or a turbo A ecu with wiring harness and sensors.
Err... this may just be semantics, but still...quicksilver said:
MAF = Mass Air Flow
AFM = Air Flow Meter
MAF is not equal to AFM.
jaydm16 said:
No, the MAFT translator doesn't have a setting for 2.5", only 3" and larger. they sell 2.5 - 3" couplers so you can use a 3" MAF with ease.
There was a list of cars that used the GM MAF - it was freaking HUGE. I got mine for an Impala SS. As long as it uses the 3 wire connector and is 3" or bigger, I think it'll work fine.
You can buy an adapter from Full Throttle for the 5 wire sensors if you want, and it's not very expensive.
You can buy an adapter from Full Throttle for the 5 wire sensors if you want, and it's not very expensive.
there's a nifty feature called "search"......empera said:wat cars do the GM maf's come off ? i'll hit up the junk yard and look for a few, for myself and to sell
voilà:
http://www.supramania.com/forums/showthread.php?p=36878