my seats wont recline or adjust at all, my windows won't go up or down, and my power door locks don't work when pushing the switch..whats wrong? blown fuse?
electircal problem
- Thread starter mk3concepts
- Start date
nopes that's all..and it happened just by taking the wire harness off of the window switches to replace the door handle..them i put the wireness back on..and tried it out..and nothing!
well yah..i tried..i dont know where the fuses are..i know theres a fuse box next to the clutch pedal and one inside the engine bay, but i don't know which fuse im looking for
so anyone know where those fuses are? and if there are even fuses for the window, door locks, and seats?
Theres also a fuse box on the passenger side kick panel. It definitly sounds like a blown fuse to me.
which fuse tho??? i don't know which one it is..i don't see one that says "window" or "door locks" or yah
Fuses always blow for a reason. Replacing it may not solve your problem, as it might blow again. If this happens, you are shorting out somewhere. Cross your fingers.
Dont worry about which one it might be, just check them all and replace any that are broken. :icon_bigg
Dont worry about which one it might be, just check them all and replace any that are broken. :icon_bigg
you did infact get into the passenger's side kick panel aswell? There are 3 fuse boxes in the car. Just making sure you can confirm you know that!
The power for windows, door locks, and seats is supplied by the Power Circuit Breaker...it's on Relay Block #5 under the driver's kick panel to the right of the fuse block. The relay block has on it (top to bottom) Turn Signal Flasher, Power Main Relay, Power Circuit Breaker, and Horn Relay.
http://www.cygnusx1.net/supra/Library/TSRM/MK3/manual.aspx?Section=BE&Page=10
Here's how you reset a CB:
http://www.cygnusx1.net/supra/Library/TSRM/MK3/manual.aspx?Section=BE&Page=4
Just as a note: The 7.5A gauge fuse provides ignition on power to the Main Power Relay causing it to close. The Main Power Relay is what supplies 30A power from the Power CB to the seats and windows. A blown gauge fuse will also cause these not to work, but there will be a bunch of other electrical items in the cockpit that will not work in addition to the seats and windows.
Geez guys...the MK III has a fairly complicated electrical system...one that will shut it down cold if certain parts fail. If you're going to own a MK III and work on it yourself, you need to spend some time learning how to read a wiring diagram. Probably not as fun turning wrenches, but a necessity on this car
http://www.cygnusx1.net/supra/Library/TSRM/MK3/manual.aspx?Section=BE&Page=10
Here's how you reset a CB:
http://www.cygnusx1.net/supra/Library/TSRM/MK3/manual.aspx?Section=BE&Page=4
Just as a note: The 7.5A gauge fuse provides ignition on power to the Main Power Relay causing it to close. The Main Power Relay is what supplies 30A power from the Power CB to the seats and windows. A blown gauge fuse will also cause these not to work, but there will be a bunch of other electrical items in the cockpit that will not work in addition to the seats and windows.
Geez guys...the MK III has a fairly complicated electrical system...one that will shut it down cold if certain parts fail. If you're going to own a MK III and work on it yourself, you need to spend some time learning how to read a wiring diagram. Probably not as fun turning wrenches, but a necessity on this car
yah..im taking an electrical class at chabot college right now..pretty boring..and still we havent learned how to used a wiring diagram..just fuses, relays, circuit breakers i think..and ya basic stuff