ECU/Connectors picture request 87 GTE

[Nghty89]

Ok, I am currently tracing down issues on why my car has no CEL, gets fuel at first but the pump stops when I crank it over, yet it still gets spark and ignition.

I have found an 87 ecu pinout and I am taking a multimeter to it to determine if and when I have power. This 87 harness is a little beat-up, but I check everything and it's not too bad. I will be replacing any broken wires as I go.


What I am asking for is a picture of everything behind the glove box. I have some things that are not connected and I have no connectors for them on the harness side so I am wondering if my na chassis is missing something? I followed the na -> turbo faq pretty closely but it doesn't mention anything about rewiring the body harness....

 

[Nghty89]

Ok, so I am currently making sure all my wires are nice and connected. There are some connections which definitely need to be replaced, but I am only using 6 of the major connectors. Where do the others go?

And what is stock and what doesn't look stock? Iirc, the previous harness owner had a SAFC hooked into the system.

 

[ForcedTorque]

The SAFC should only be 8 wires. I have the Neo, which is the newer version, and it only has 8. I can't help but wonder if my problems are in that wiring. I am looking into the wiring diagrams that your post in my thread motivated me to find. I will be soon chasing those 8 wires before anything else, after doing the tests that I have not done over yet.