EBC wire help........

[marlonvip]

Hi Guys,

Bought this old apexi Avc-r ebc and Need a little help figuring out the wiring......

I figure that the black and red is power - ground
The Blue and the Black/red on the right is for the boost solenoid in the same
color

But what is the green for????

Anyone please share some light


Thanks
Marlon

 

[marlonvip]

Should mention this is an old Apexi avc-r gen 1...........but shouldnt it be like hooking up every other electronic boost controller???

red = power
Black = ground

Blue = boost solenoid
Red/black = Boost solenoid

But wtf is the green for?
Do it hookup to the ecu or other component in the car??

Please some help:1zhelp:

Thanks
Marlon

 

[dbsupra90]

http://www.fd3s.net/avc-r_manual_gen1.pdf

try that

 

[marlonvip]

Thx Dsupra90,

I have that but its for the super and NOT the regular..........gen 1
Do you think theres any wiring differences?
Or install diff??


thanks
Marlon

 

[dbsupra90]

oh ok i think i remember the version you are talking about. the wiring should be the same up until the blue screen s-avcr. not 100%, but i'll see if i can find the manual for that one.

 

[marlonvip]

that would be great - I really appriciate it

thx

 

[Sean]

oh ok i think i remember the version you are talking about. the wiring should be the same up until the blue screen s-avcr. not 100%, but i'll see if i can find the manual for that one.

Any further with this manual as I am in despreate need of it also please same as marlonvip just the green wire :1zhelp: pleaseeeeeeeeeeeeeeeeeeeeeeee:1zhelp:

 

[marlonvip]

Any further with this manual as I am in despreate need of it also please same as marlonvip just the green wire :1zhelp: pleaseeeeeeeeeeeeeeeeeeeeeeee:1zhelp:

Hi Sean,

Sorry to say im not much further........I found out that this EBC comes from the Japanese Domestic market(JDM) and have never off. been sold in US or europe,
So any manual on this is on japanese and very VERY hard to come by....:-(

Anyway I bought the maft pro so im thinking this will soon be up sale but lets see........

Lmk if you find any info

Thanks
Marlon

 

[Sean]

Hi Sean,

Sorry to say im not much further........I found out that this EBC comes from the Japanese Domestic market(JDM) and have never off. been sold in US or europe,
So any manual on this is on japanese and very VERY hard to come by....:-(

Anyway I bought the maft pro so im thinking this will soon be up sale but lets see........

Lmk if you find any info

Thanks
Marlon

Marlon thanks for your reply mate will go to the JDM for some help then
Thanks again

 

[Sean]

Just for future needs the green wire goes to the speed sensor ECU pin

 

[Zazzn]

I loved the old avcr it fit perfecly in the ashtray.