does anyone have a pic of the head to firewall ground?

[tweak666]

I was reading this thread:
http://www.supramania.com/forums/showthread.php?t=76999

and saw that one of the grounds, the head to firewall, is missing on my car, or maybe I'm just not looking in the right place for it. Anyone have a picture of it? Or is there a place to find it in the TSRM?

 

[Poodles]

Small wire from the back engine hoist hook to the firewall.

 

[tweak666]

will any bolt on the firewall work?

 

[RazoE]

I've only seen pre-89's with these at the junk yard for some reason...

I snagged one from an 88, no noticeable changes, but it's better than nothing...

 

[Poodles]

My 89 has it...

 

[GrimJack]

My 89 has it...

Mine too.

 

[92TealSupra]

will any bolt on the firewall work?

Yes any hole will work, but this is where is goes*

Red circle.

Good luck.

[B

[/B]

 

[j3pz]

Yes any hole will work, but this is where is goes*

Red circle.

Good luck.

i see no picture?

 

[RazoE]

forgot to mention, I've only looked at N/A's...

maybe 89+ didn't come with that ground..?

 

[Poodles]

or it was removed or broken see how many of these cars have been worked on..

 

[jetjock]

You can improve upon the factory scheme by running a wire from the rear O2 sensor stud to the firewall...

 

[tweak666]

92teal: thanks, that helped!

jetjock: i actually read that in one of your other posts. i did that one and the igniter ground. i am a little confused about the chaining them together with a single piece of cable. are there special ring terminals for 10awg?